Quote:
So swap in new needles and seats then?
Correct, both of em. Lube the O rings on the needle/seat assys before installation. Gasket on both sides of the float hex locknut & I like to lube em as it will be turned on occaision. As said check the floats for saturation. Want a good high flow 10 micron filter right at the carb inlet. EDIT glassbead or new plugs/confirm your psi ain't excessive & you'll be back in business

Last edited by RapidRobert; 04/19/15 03:25 AM.

live every 24 hour block of time like it's your last day on earth