Wedge
KB block 4.500 bore.
Standard cam location. Has the larger 54mm cam option.
K1 crank 4.675 with 2.2 rod journals
B1-MC's with Jesel, 1.7 ratio, paired shaft rockers. CNC ported. Flows 445 on the In. and 300 on the Ex.
Will be running carburated alcohol.

Scott over at Koffel's recommends this cam grind;
285 @ .05 In.
300 @ .05 Ex. with a 115 lobe separation.
.490 lobe lift In.
.485 lobe lift Ex.

I also wanted to run the dual swap firing order. 1 8 7 2 6 5 4 3

I dont know if any of this helps