Backcut intake vavles - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Backcut intake vavles

Print Thread

Backcut intake vavles #1765104 02/28/15 10:38 AM 02/28/15 10:38 AM
Joined: Jan 2014 Posts: 142 Vermont B bracketcharger OP member
bracketcharger OP member B Joined: Jan 2014 Posts: 142 Vermont	I'm working up a set of #452 heads for my 440 bracketcar and I would like to backcut the intake valves. Can someone tell me how wide the backcut should be ? The valves are 2.14 with a 45 degree seat angle. Thanks Paul

Entire Thread
Subject	Posted By	Posted
Backcut intake vavles	bracketcharger	02/28/15 02:38 PM
Re: Backcut intake vavles	BSB67	02/28/15 03:15 PM
Re: Backcut intake vavles	bracketcharger	02/28/15 03:36 PM
Re: Backcut intake vavles	BSB67	02/28/15 04:15 PM
Re: Backcut intake vavles	bracketcharger	02/28/15 05:13 PM
Re: Backcut intake vavles	skrews	02/28/15 08:35 PM
Re: Backcut intake vavles	ccdave	02/28/15 08:58 PM
Re: Backcut intake vavles	bracketcharger	03/01/15 01:41 AM
Re: Backcut intake vavles	classracer	03/01/15 08:43 PM
Re: Backcut intake vavles	bracketcharger	03/01/15 10:38 PM
Re: Backcut intake vavles	cudaman1969	03/01/15 11:14 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1