Its feels like Christmas when opening up packages with carparts



The springs are the -1". I just hope the wheel/tire combo will fit when eveything is bolted.

May be a dumb question, but which way have you mounted the AFCO shocks, if I understand it correct, the Afco´s can be mounted any way.. It also seems I need to make some spacers when bolting the shocks to the mounts.

When reading the instruction from Calvert they say to mount the Transfer Link in the lower hole, BUT the "instruction setup" from YellowBullet says mount the transfer link in the upper hole.. -How have you done this, just followed the instructions per Calvert or...

If everything fits after al is bolted, I am planing on adding sliders, but Ill start with the stock rear hangers...

Thanks for the interest..

/Tom