Quote:
Quote:
Not hydraulic, but might give you some ideas... Crane Cams 680201 "Replacement for factory 425 HP 426 cu.in. camshaft"
http://www.race-mart.com/Crane_Cams-416680.html
this is a stock eliminator cam and shouldn't be confused with the original cams. the original cams were probably around mid 230's at .050. a '63 cam would be 300/300-.509. they had gentle ramps, 112lsa with 3 degrees of retard ground into them.
the t85 trans has a 2.10 1st gear, and 1.44 2nd. taking off in 1st gear with one of these is only slightly better than taking off in 2nd with an 833 trans.
This is not a Stock Eliminator camshaft. It's a replica of what you would find from the factory in a 1963 426 Max Wedge, along with solid lifters and adjustable rocker arms. A Stock Eliminator camshaft nowadays would have much more duration. Regards, Chase
Last edited by cknight; 02/27/15 12:37 PM.
