Used the spindle and brakes for a 79 Cordoba (73 and up B, any F/J/M body) to convert my 64 300, had to shorten the 64'a tierod ends to get the toe right. I think I had to use the 79's steering arm as the 64's wouldn't bolt to the 79 spindle. It has been over 20 years now so details are a bit foggy.

Spindle height was the same, ball joint tapers and diameters were the same. I researched the details before I started looking for a donor.

They say there are no such thing as a stupid question.
They say there is always the exception that proves the rule.
Don't be the exception.