727 Trans pan - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech 727 Trans pan

Print Thread

Re: 727 Trans pan [Re: MoParFish] #1729499 01/14/15 05:33 AM 01/14/15 05:33 AM
Joined: Dec 2006 Posts: 4,648 aotearoa rebel master
rebel master Joined: Dec 2006 Posts: 4,648 aotearoa	TCS on the Dart & a Trickflow/Summit with 1/8 machined off the flange. i had a B&M but it sits too low, the Summit one is overkill on the flange so it was easy to mill 0.120 off it to aid clearence for a street strip car.

Entire Thread
Subject	Posted By	Posted
727 Trans pan	RAY1969CARS	01/14/15 04:08 AM
Re: 727 Trans pan	Chris2581	01/14/15 04:33 AM
Re: 727 Trans pan	slammedR/T	01/14/15 04:35 AM
Re: 727 Trans pan	gsmopar	01/14/15 05:04 AM
Re: 727 Trans pan	MoParFish	01/14/15 06:54 AM
Re: 727 Trans pan	rebel	01/14/15 09:33 AM
Re: 727 Trans pan	dvw	01/14/15 01:20 PM
Re: 727 Trans pan	hemi-itis	01/14/15 05:34 PM
Re: 727 Trans pan	StealthWedge67	01/14/15 05:57 PM
Re: 727 Trans pan	an8sec70cuda	01/14/15 09:19 PM
Re: 727 Trans pan	dvw	01/15/15 12:19 AM
Re: 727 Trans pan	CRT	01/15/15 11:35 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1