will try to post pics but not too successful doing it. because it is gm column, u can use a quick disconnect kit for a chevy. I used a grant wheel and using the long stainless steel cover mounted it between wheel and female part of disconnect. then I put a 3/8 drive impact socket 1/2" and welded it into female part of disconnect. that way when u use a longer 5/16 bolt and index it properly, u can still use telescoping feature. I don't have a horn so no big deal for me. then I drilled hole thru stainless cover were I could use aircraft type release pin and it is about 3" long. it goes thru drilled hole and into groove on disconnect. it took about 10 hours to get all parts aligned and indexed to work as slick as it does. I will try to take cell pics sunday of it