I got my headers in and here are some pics if anyone is thinking of going the TTI route.
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175827_zpsjpp9gw1x.jpg)
I got the 6.1 Hemi swap into a B/E body with torsion bars un-coated part number TT61HC-C0 these are 1-3/4" tubes
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175840_zpskapqgri2.jpg)
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_180042_zpsoeyxf1ff.jpg)
Worth $642.00 dollars? You decide...
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175629_zps2ttalgps.jpg)
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175524_zpswwta0hjm.jpg)
I would say these headers are good from far but far from great
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_180012_zpsgmk8lykj.jpg)
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_180354_zpspdr4kmfz.jpg)
I would have rather they not ground down the welds.
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175448_zpsxhppxsfr.jpg)
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175435_zpsqlysmrsd.jpg)
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175247_zps35q14f9c.jpg)
Passenger side collector looks like crap
![](http://i101.photobucket.com/albums/m69/arielrylis/Mobile%20Uploads/20150206_175126_zpswa9cz7dc.jpg)
Driver side collector not too bad
As long as the headers seal they shouldn't be too bad and with a black ceramic coat they should perform ok
I feel that quality wise they are a little below the quality of my Doug's D453 headers but I was able to get those for about $500 bucks
Oh well, I guess you get what you pay for...
![](http://i101.photobucket.com/albums/m69/arielrylis/bluethumb.gif)