ring end gap? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer ring end gap?

Print Thread

Re: ring end gap? [Re: fastmark] #170705 12/20/08 12:33 AM 12/20/08 12:33 AM
Joined: Jul 2008 Posts: 30,493 Florida STAYcation dOc … The village idiot's idiot
dOc … The village idiot's idiot Joined: Jul 2008 Posts: 30,493 Florida STAYcation	cylinder taper ? ... ? With 030 ring gap and both bottom and top? I will bet that he might have near or over .010 piston-top-wall. Not good.

Entire Thread
Subject	Posted By	Posted
ring end gap?	65rbdodge	12/19/08 07:29 PM
Re: ring end gap?	RapidRobert	12/19/08 07:49 PM
Re: ring end gap?	dOc …	12/19/08 07:54 PM
Re: ring end gap?	dmerc	12/19/08 08:34 PM
Re: ring end gap?	fastmark	12/19/08 11:43 PM
Re: ring end gap?	moper	12/20/08 12:55 AM
Re: ring end gap?	dOc …	12/20/08 04:33 AM
Re: ring end gap?	buildanother	12/19/08 11:37 PM
Re: ring end gap?	pacifica	12/20/08 01:14 AM
Re: ring end gap?	68Fastback	12/20/08 05:08 AM
Re: ring end gap?	MR_P_BODY	12/20/08 05:32 AM
Re: ring end gap?	68Fastback	01/01/09 07:44 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1