Anyone use Brad Penn moly ep2 on cam lobes

Print Thread

Re: Anyone use Brad Penn moly ep2 on cam lobes [Re: SNK-EYZ] #1684388 10/13/14 12:42 AM 10/13/14 12:42 AM
Joined: Jan 2004 Posts: 2,190 SW MO closer9 top fuel
closer9 top fuel Joined: Jan 2004 Posts: 2,190 SW MO	Quote: What Dwayne Porter recommended that I use when I install my new flat tappet cam in my Hemi is Joe Gibbs Driven Assembly Grease part number 00732. He said it stays on the lobes and doesn't drain off if you don't fire the engine right away. He also recommended using Joe Gibbs break in oil too for the cam break in. The assembly grease. http://joegibbsdriven.carshopinc.com/product_info.php/products_id/105676/00732 That's what Hughes recommended and what I used. (actually, seems like it came with the cam) Worked well for me... Daily: '19 Frontier 4WD Belle: '67 Belvedere Convertible, 318/727 in Go ManGo! Other: '64 C10, 283/3 on the tree

Entire Thread
Subject	Posted By	Posted
Anyone use Brad Penn moly ep2 on cam lobes	OldMoparMan	10/11/14 02:10 AM
Re: Anyone use Brad Penn moly ep2 on cam lobes	RapidRobert	10/11/14 02:40 AM
Re: Anyone use Brad Penn moly ep2 on cam lobes	SNK-EYZ	10/11/14 05:26 AM
Re: Anyone use Brad Penn moly ep2 on cam lobes	sthemi	10/13/14 04:35 AM
Re: Anyone use Brad Penn moly ep2 on cam lobes	closer9	10/13/14 04:42 AM
Re: Anyone use Brad Penn moly ep2 on cam lobes	OldMoparMan	10/14/14 12:28 AM

Hop To