My goal is to build a very bad ass handling a body. I have owned many mopars all levels of hp but NONE that actually could take a turn. I purchased a one owner 70 dart and put it on the lift and removed ALL suspension. I have a 340 a833 ready to drop in. This is what i have ordered so far.
Hotchkis front sway bar
Hotchkis rear sway bar
Hotchkis leaf springs
billstein shocks
PST 1.03 torsion bars
New motor mounts
New trans mounts
I bought this disc brake kit. (i know some may have gone a different route however i liked how complete the kit was)
http://www.ebay.com/itm/4-Wheel-Manu...1e7638&vxp=mtrFull stainless brake lines
8 3/4 with posi 3.55
What am i missing, i know i need tie rods, inner and outer and sleeves. I need the stabilizer bars (not sure if that is what they are called, the ones that go from the lower control arm to the k frame) and control arm bump stops.
Where can i buy the individual parts and is there brands that are more aimed to my needs than others.
Thanks for any and all input it is greatly appreciated.
Joe
