Quote:
uh oh. I don't know how mine flowed before porting
but this what they flow after Jeff ported them
Quote:
i was shocked by these numbers on the intake just as much as anyone looking at this,, this thing was wayyy good for a 2.250 valve.
superflow 600, 4.320 with bore notch, 28"
intake 2.250 .100-78.5 cfm .200-162.4 .300-257.5 .400-342.4 .500-396.5 .600-422.4 .700-440.7 .800-450.6 .900-456.5
exhaust 1.940 open at flange/2.0" tube .100-69.0/70.5 .200-146.2/152.4 .300-178.2/185.0 .400-208.4/220.8 .500-239.5/255.6 .600-259.1/274.0 .700-268.7/286.7 .800-273.7/293.6 .900-278.7/297.3
this is a std low exh port and a std int opening, its a good sized port but with only two pushrod tubes in the head, #1 and #5 exhaust. ferrea valves.
jeff
Those numbers look real close to the Stage V heads (Stage V ported) I had flowed on a Super Flow 600 bench several years ago, maybe a little better
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|