Quote:

I just put the old distributor back in and it works.


Alright so it was not the vac adv altering the phasing it was the vac adv moving the top plate which was changing the reluctor gap way too much cuz of the slop in the pin that connects the top plate to the lower plate. Actually the little black triangle may have come off (rare tho) or the pin has wallowed out the hole. You might take out the center clip (a pain) & take out the 2 plates then take off the triangle clip on the bottom & seperate the 2 plates & see what you see for play. Glad you're up & running


live every 24 hour block of time like it's your last day on earth