Throw out bearing rotating in clutch fork.

Print Thread

Re: Throw out bearing rotating in clutch fork. [Re: 5.7bob] #1628054 06/05/14 03:49 AM 06/05/14 03:49 AM
Joined: Mar 2011 Posts: 1,655 Cut and Shoot, TX kentj340 top fuel
kentj340 top fuel Joined: Mar 2011 Posts: 1,655 Cut and Shoot, TX	Check if the part named pivot is cracked or misshaped. That happened to me - the pivot does not seem to be strong enough. The fork has a riveted flat retaining spring that is engaged in a hole in the pivot. The pivot is bolted to the back of the bell housing with two screws. If the pivot is bad, make your own out of heavier material. If you don't see two dolphins, you need a vacation.

Entire Thread
Subject	Posted By	Posted
Throw out bearing rotating in clutch fork.	5.7bob	06/03/14 01:42 PM
Re: Throw out bearing rotating in clutch fork.	MOPARMIKE69	06/03/14 04:16 PM
Re: Throw out bearing rotating in clutch fork.	5.7bob	06/04/14 02:29 AM
Re: Throw out bearing rotating in clutch fork.	kentj340	06/05/14 07:49 AM
Re: Throw out bearing rotating in clutch fork.	jbc426	06/05/14 08:47 AM
Re: Throw out bearing rotating in clutch fork.	5.7bob	06/05/14 01:10 PM

Hop To