Throttle bracket............ - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Throttle bracket............

Print Thread

Re: Throttle bracket............ [Re: Dragula] #1619947 05/14/14 12:18 AM 05/14/14 12:18 AM
Joined: Oct 2009 Posts: 1,267 North, Alabama D-50 OP pro stock
D-50 OP pro stock Joined: Oct 2009 Posts: 1,267 North, Alabama	Do not know if I will get any gains yet. I put it on and could not get it to idle. I sent it to ProSystems today for a refresh and updates. When I had it on it the throttle was really hard to mash since the angle was really bad from using the old cable bracket. I just want to have everything corrected by the time the carb comes back next week. 8144010-CIMG0081.JPG (56 downloads) 1.33 60 ft,6.21 at 110.59 in the 1/8, pump gas small block,2950lbs,drag radials,mufflers and driven to track ...

Entire Thread
Subject	Posted By	Posted
Throttle bracket............	D-50	05/14/14 04:00 AM
Re: Throttle bracket............	Dragula	05/14/14 04:12 AM
Re: Throttle bracket............	D-50	05/14/14 04:18 AM
Re: Throttle bracket............	MR_P_BODY	05/14/14 04:34 AM
Re: Throttle bracket............	racerx	05/14/14 08:01 AM
Re: Throttle bracket............	therocks	05/14/14 01:44 PM
Re: Throttle bracket............	Triple Threat	05/14/14 06:17 PM
Re: Throttle bracket............	therocks	05/14/14 06:59 PM
Re: Throttle bracket............	AndyF	05/14/14 10:48 PM
Re: Throttle bracket............	AndyF	05/14/14 05:26 PM
Re: Throttle bracket............	D-50	05/15/14 12:34 AM
Re: Throttle bracket............	AndyF	05/15/14 06:49 PM
Re: Throttle bracket............	Saskabusa	06/05/14 02:35 AM
Re: Throttle bracket............	Mopar-Al	06/05/14 02:52 AM
Re: Throttle bracket............	1967dartgt	06/05/14 05:35 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1