I like and want to put on the Chrysler Magnum 500 (Bull's-Eye) center caps. I'm just wondering if anyone else has put those center caps on the American Racing Magnum 500 aluminum wheel. I'm fairly certain that the center caps will fit/work on these wheels, but I question whether the retainers/inserts will fit through the back of the center hole. Even if it does fit, I would imagine that the material thickness would be greater than the steel wheels they were originally used on, which would prevent the use of the supplied bolt that's used to hold the cap to the wheel. If that were the case, I would just use a longer bolt. I suppose I could just get a set, and try it out when the wheels arrive in about 4 weeks from now. If the retainers don't fit through the wheel's center hole, I could probably improvise and come up with an alternative solution to holding the center cap in place. Any other help would be much appreciated. Thanks.