Main bore size of a 383/400 - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Main bore size of a 383/400

Print Thread

Re: Main bore size of a 383/400 [Re: rickseeman] #1614464 05/01/14 01:52 AM 05/01/14 01:52 AM
Joined: Jan 2003 Posts: 6,591 Canton, Ohio S Sport440 master
Sport440 master S Joined: Jan 2003 Posts: 6,591 Canton, Ohio	Quote: I can't believe with all my Mopar books I can't find the main bore min-max size for a 400. Thanks for your help. Well the stock-min size for the 400 is 4.342. As for max, less is better. Keep the bores as thick as possible. Dont try to gain CI with the bores.

Entire Thread
Subject	Posted By	Posted
Main bore size of a 383/400	rickseeman	05/01/14 05:27 AM
Re: Main bore size of a 383/400	Sport440	05/01/14 05:52 AM
Re: Main bore size of a 383/400	StealthWedge67	05/01/14 06:13 AM
Re: Main bore size of a 383/400	Chris'sBarracuda	05/01/14 06:23 AM
Re: Main bore size of a 383/400	mike s	05/01/14 07:23 AM
Re: Main bore size of a 383/400	rickseeman	05/01/14 03:31 PM
Re: Main bore size of a 383/400	moparlifer	05/01/14 04:18 PM
Re: Main bore size of a 383/400	rickseeman	05/01/14 04:22 PM
Re: Main bore size of a 383/400	MR_P_BODY	05/01/14 04:29 PM
Re: Main bore size of a 383/400	rickseeman	05/01/14 04:55 PM
Re: Main bore size of a 383/400	MR_P_BODY	05/01/14 04:58 PM
Re: Main bore size of a 383/400	Oyvind Mopar	05/01/14 10:27 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1