Can you use a Cometic head gasket on a

Print Thread

Re: Can you use a Cometic head gasket on a [Re: dvw] #1607984 04/16/14 11:16 PM 04/16/14 11:16 PM
Joined: Nov 2004 Posts: 4,330 Lynchburg, VA Leon441 master
Leon441 master Joined: Nov 2004 Posts: 4,330 Lynchburg, VA	Are you using new gaskets? If the O-ring stands out more than .012 you will also have trouble. A .010 deep .041 wide receiver will allow the gasket to pinch tighter. Some o-ring jobs are horrible. The fit of the ends is important. Cosmetics will work with job weld or copper o-rings filed flat. As always if the surfaces are not flat nothing will work Career best 8.02 @ 169 at 3050# and 10" tires small block power.

Entire Thread
Subject	Posted By	Posted
Can you use a Cometic head gasket on a	Sammy	04/16/14 01:50 AM
Re: Can you use a Cometic head gasket on a	rickraw	04/16/14 02:14 AM
Re: Can you use a Cometic head gasket on a	Cab_Burge	04/16/14 02:15 AM
Re: Can you use a Cometic head gasket on a	Sammy	04/16/14 02:31 AM
Re: Can you use a Cometic head gasket on a	MR_P_BODY	04/16/14 02:45 AM
Re: Can you use a Cometic head gasket on a	dizuster	04/16/14 05:52 AM
Re: Can you use a Cometic head gasket on a	B G Racing	04/16/14 12:48 PM
Re: Can you use a Cometic head gasket on a	roadhazard	04/16/14 01:48 PM
Re: Can you use a Cometic head gasket on a	Cab_Burge	04/16/14 08:12 PM
Re: Can you use a Cometic head gasket on a	B G Racing	04/16/14 08:34 PM
Re: Can you use a Cometic head gasket on a	dirty magnum	04/16/14 11:28 PM
Re: Can you use a Cometic head gasket on a	dogdays	04/16/14 11:32 PM
Re: Can you use a Cometic head gasket on a	dvw	04/17/14 02:11 AM
Re: Can you use a Cometic head gasket on a	Leon441	04/17/14 03:16 AM
Re: Can you use a Cometic head gasket on a	Moparnut426	04/17/14 03:22 AM

Hop To