I have always thought that the 130 tooth flywheel was always the same unless it was for the external balance 360. but when searching for one it seems that there is some difference between the 130 tooth used in the trucks and the cars.
both napa and rockauto have them listed different.
here is the part number for an 83 dodge D100 with the A833 overdrive 4 speed, from napa NCF88215 it as listed only for vans and pickups. they don't list one for cars

Attributes $77.99
# Flywheel Teeth : 130
# Flywheel To Crankshaft Mounting Holes : 6
# Flywheel to Pressure Plate Mounting Holes : 6
Flywheel O.D. : 11"


Here is the rock auto specs for the same application

AMS AUTOMOTIVE Part # 167409 $67.79
With 10-1/2" Cover, Diaphragm Option; Flywheel Spec: FLAT
w/10-1/2" Cover; Flywheel Spec: FLAT

SACHS Part # NFW1204 $122.79
Standard; 10 1/2" Clutch

I cant find a listing for a car flywheel on either site. but if this flywheel is the same or interchangeable with the car flywheel , they are cheaper. probably because they are made overseas I would guess. any idea if they are the same?