Quote:

My question is, I want to run my stage VI mopar performance heads and a blower. From my underdtanding there is no blower intake that will fit it properly. I have some spacer place, but do i need my blower intake modified to fit the stage VI heads, or is there a blower intake made for this setup?



What block and exacty which head ?

If this is on an RB block then you need the spacer and a 440 manifold .

If this is on a B block then you can run a 440 intake , no spacers required , if you have a 383/400 blower intake then you will need the spacers.

If these are the std port window location 311 heads then it's 440 intake on RB , 383/400 intake on a B block , no spacers for either would be needed.


Can't say what you would need to do if they are 6's with a max wedge port window.