Hemi guys...Barton SP Intake to Indy 426-1 heads qun

Print Thread

Hemi guys...Barton SP Intake to Indy 426-1 heads qun #1603305 04/05/14 02:46 AM 04/05/14 02:46 AM
Joined: Sep 2005 Posts: 625 Deep DEEP SOUTH LAD 524 OP mopar
LAD 524 OP mopar Joined: Sep 2005 Posts: 625 Deep DEEP SOUTH	Hey guys - quick qun. Will this intake OOTB bolt up to a the Indy 426-1 heads? Are they a bolt on deal? Im looking to run a shorter intake over an Indy 426-4 for hood clearance but after sitting this thing on the block there is a gap of 15.5mm b/w the top of the block and the bottom of the valley plate !! What gives? Any advice would be much appreciated thx ! 8102016-Barton1.JPG (465 downloads) Last edited by ratbastad; 04/05/14 06:24 AM.

Entire Thread
Subject	Posted By	Posted
Hemi guys...Barton SP Intake to Indy 426-1 heads qun	LAD 524	04/05/14 06:46 AM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	B G Racing	04/05/14 12:33 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	sshemi	04/05/14 12:44 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	LAD 524	04/05/14 12:57 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	Defbob	04/05/14 03:22 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	mr_340	04/05/14 04:35 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	B G Racing	04/05/14 05:27 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	AndyF	04/06/14 03:39 AM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	LAD 524	04/06/14 03:57 AM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	an8sec70cuda	04/08/14 02:35 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	chryco	04/12/14 07:29 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	DodgeCharger	04/05/14 10:08 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	dusturbd340W5	04/05/14 10:20 PM
Re: Hemi guys...Barton SP Intake to Indy 426-1 heads qun	B G Racing	04/05/14 11:15 PM

Hop To