Quote:

OK. So my turnsignals didn't work on my 68 Dart. I put in a new switch and now they still don't work correctly. If I turn the 4-ways on they work fine. If I turn the directionals on, they will blink a few (3,4,5 or so) times then they will stop. They may start back up again but just at a sporadic blink. When they stop, you can hear the blinker relay do the first "tink", but not the second "tonk" (for lack of better words). When they stop the are dark, not illuminated. What am I missing???




There are two flashers, the easy one to find and get to is for the hazards. The hard one to find and get to is for the turn signals.

The hard one ls bolted to the pass side of the ash tray housing on an A body, IIRC. I suppose you could pull the glove box liner out to get to it.


They say there are no such thing as a stupid question.
They say there is always the exception that proves the rule.
Don't be the exception.