I just bought a Lunati Voodoo camshaft to replace the damaged old comp cams stick in my 360.

The voodoo cam lists a LSA of 112 and an ICL of 108, which I realized and it shows on the cam card as 4 degrees advanced.

Does this mean that if I use the crank and cam sprocket "dot-to-dot" as a baseline for installing it, that is ground to be set up close to set up there without using the 4 dgree advanced keyway in the sprocket?

Or does it mean they recommend installing it at four degrees advanced using the crank sprocket keyway to get 108, but "dot-to-dot" would put it at 112.

I know it needs to be properly degree-ed in to be sure. Just wondering where to start as far as setting it up.