48 r block question with 59 heads

Print Thread

Re: 48 r block question with 59 heads [Re: RAY1969CARS] #1586866 03/02/14 03:13 AM 03/02/14 03:13 AM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	The push rods holes have to be REALLY opened up... the difference is just the 48* lifter bores so if you get the push rods to fit just put the W-5 intake on it ... if its the tall block then it should go right on but if its the short 9.2 deck its gonna take some mill work to fit being that the heads are much closer

Entire Thread
Subject	Posted By	Posted
48 r block question with 59 heads	RAY1969CARS	03/02/14 05:54 AM
Re: 48 r block question with 59 heads	1967dartgt	03/02/14 06:05 AM
Re: 48 r block question with 59 heads	MR_P_BODY	03/02/14 07:13 AM
Re: 48 r block question with 59 heads	1967dartgt	03/02/14 07:24 AM
Re: 48 r block question with 59 heads	RAY1969CARS	03/02/14 07:35 AM
Re: 48 r block question with 59 heads	MR_P_BODY	03/02/14 02:31 PM
Re: 48 r block question with 59 heads	dizuster	03/02/14 07:13 PM
Re: 48 r block question with 59 heads	RAY1969CARS	03/02/14 07:56 PM
Re: 48 r block question with 59 heads	NoFrills	03/02/14 08:03 PM
Re: 48 r block question with 59 heads	Quicktree	03/02/14 08:07 PM
Re: 48 r block question with 59 heads	RAY1969CARS	03/02/14 08:49 PM
Re: 48 r block question with 59 heads	J_BODY	03/03/14 01:18 AM
Re: 48 r block question with 59 heads	RAY1969CARS	03/03/14 01:23 AM
Re: 48 r block question with 59 heads	vc360	03/03/14 12:56 PM
Re: 48 r block question with 59 heads	72demon416	03/05/14 02:24 AM
Re: 48 r block question with 59 heads	SpareParts	03/05/14 02:36 AM

Hop To