Hi,
cooling fan is 16" electric blowing the correct way , pull type. no thermostat . fitted factory iron housing , had aluminium with way smaller intake ports . restricted bypass in housing . raised rear of bonnet to release air better , no gain though after driving and with motor idling 225temp opened bonnet and temp dropped to 205 . tried 2 waterpumps , 1 had curved fins - 1 had pressed metal paddles . pulleys appear stock steel , 6 3/4" crank similar size on pump . I do have a slightly smaller pump pulley , maybe 1/4" . when you pull the cap on rad you can see water flowing
I can open up the hole under the hemi style scoop if need be .
I can try a 7 blade fixed fan though I have no shroud to suit .
I will check timing though it does have TCI rattler
thanks again ,

Tex