need advice on flat tappet cam for roadracing HEMI

Print Thread

need advice on flat tappet cam for roadracing HEMI #1573688 02/03/14 07:52 PM 02/03/14 07:52 PM
Joined: Aug 2010 Posts: 208 Munich, Bavaria D docford OP enthusiast
docford OP enthusiast D Joined: Aug 2010 Posts: 208 Munich, Bavaria	we found out that the STX21 cam that came with the used HEMI that I bought is worn beyond specs, so a set of new camshaft with lifters is on the line. I'm looking for a cam in the 300� adv.duration and .550 lift at the valve range. Which cam would you recommend ? The lifter bores are .907. Should I stick with standard .903 lifters ? Which solid flat tappet lifters would you recommend ?

Entire Thread
Subject	Posted By	Posted
need advice on flat tappet cam for roadracing HEMI	docford	02/03/14 11:52 PM
Re: need advice on flat tappet cam for roadracing HEMI	AndyF	02/04/14 12:11 AM
Re: need advice on flat tappet cam for roadracing HEMI	JohnRR	02/04/14 12:15 AM
Re: need advice on flat tappet cam for roadracing HEMI	docford	02/04/14 10:43 PM
Re: need advice on flat tappet cam for roadracing HEMI	MR_P_BODY	02/04/14 12:27 AM
Re: need advice on flat tappet cam for roadracing HEMI	JohnRR	02/04/14 09:48 PM
Re: need advice on flat tappet cam for roadracing HEMI	qwkmopardan	02/04/14 12:52 AM
Re: need advice on flat tappet cam for roadracing HEMI	jcc	02/04/14 09:58 PM
Re: need advice on flat tappet cam for roadracing HEMI	docford	02/04/14 10:45 PM

Hop To