I'm looking at an edelbrock cam for my engine going into a 68 Charger. I have a set of RPM heads 84cc, the RPM intake and 750 summit carb. will this be a good setup for me? The engine is out of a 71 Chrysler Imperial 9.0 to 1 compression. I can replace the pistons if the compression is too low. I have the matching 727 trans and converter from the Imperial and a 3.23 8 3/4 rear end. looking to build a good cross-county cruiser. Any suggestions would be appreciated.
Ron
http://www.edelbrock.com/automotive_new/mc/camshafts/locator.php?part_number=7194&submit=gohttp://www.edelbrock.com/automotive_new/mc/cylheads/chrysler/bb_perf_rpm.shtml
