Quote:

Quote:

Quote:

Not as low but low




OK - is that yours? If so, how did you get the rear so low? I have a customer with a '60 Town Panel that wants to lower it but if I flip the axles he will have less than 2" of travel and i am afraid it will bottom out on the slightest bump




The leaf springs mount to the outside of the frame, If you remount the spring perches higher on the frame, (I think upside down works) it will lower the rear about 1/2 the amount flipping the axle does. Not the lowest, but better then standard. Gene




Thanks - i will take a look at that.