Quote:
I've got one also...Works great one of the best investments for driveability...4:10 dana, 727 and a high stall converter..Ends up with a 3;21 ratio in OD..
Me too... Have one in my '69 Charger Daytona, 440-727-4.10 Dana car...
Can't find my former thread on here on my install, but here's the thread on the Charger Board I did..
Really the only modification I did was round off the corners of the casting near the floor pan. I did have to "round-out" the floor pan a wee bit using a impact socket to get the "dimple" rather smooth and hardly noticeable.
Gear Vendor thread on my Daytona
Last edited by hemi68charger; 12/25/13 01:19 PM.
