I aligned front ends in the 70s on these cars. You can lower the torsion bars down to lower the front end, this will change your camber, if you don't have any shock bounce your way too high. get it on the front end rack, lower your front end until the car is slightly lower in the front, first check your air pressure, then lower it,, bounce the front end several times, then go to the rear of the car, stand back several feet and see if the car looks level to you, then do your front end alignment, get all the pos. caster you can get, this keeps cars from road walking, if you can't get the camber to come in, raise or lower the car with torsion bar adjustment see if it will come in.. if you readjust the bars go to the rear again to see if it looks level..