.040 intake p/v too tight? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech .040 intake p/v too tight?

Print Thread

Re: .040 intake p/v too tight? [Re: dodgeram1998] #1500656 09/14/13 05:03 AM 09/14/13 05:03 AM
Joined: May 2008 Posts: 5,399 Aurora, Colorado 451Mopar master
451Mopar master Joined: May 2008 Posts: 5,399 Aurora, Colorado	If it's still on the engine stand, I would just pull it apart and machine the pistons for more clearance now than be a factor in the future. When I built my 500" stroker I went with a smaller cam because if P-V clearance issues, when I should have just milled the pistons then. Now that the engine is apart again, I'm going to do what I should have done two years ago.

Entire Thread
Subject	Posted By	Posted
.040 intake p/v too tight?	dodgeram1998	09/13/13 01:59 AM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 02:27 AM
Re: .040 intake p/v too tight?	Cab_Burge	09/13/13 03:47 AM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 05:21 AM
Re: .040 intake p/v too tight?	LSP	09/13/13 03:52 AM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 05:23 AM
Re: .040 intake p/v too tight?	SuperStocker	09/13/13 05:29 AM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 05:36 AM
Re: .040 intake p/v too tight?	Guitar Jones	09/13/13 12:15 PM
Re: .040 intake p/v too tight?	W5DART66	09/13/13 12:24 PM
Re: .040 intake p/v too tight?	gregsdart	09/13/13 12:35 PM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 02:39 PM
Re: .040 intake p/v too tight?	Crizila	09/13/13 03:03 PM
Re: .040 intake p/v too tight?	RT540	09/13/13 03:42 PM
Re: .040 intake p/v too tight?	dodgeram1998	09/13/13 04:56 PM
Re: .040 intake p/v too tight?	B1MAXX	09/13/13 05:22 PM
Re: .040 intake p/v too tight?	Biginchmopar	09/13/13 09:53 PM
Re: .040 intake p/v too tight?	451Mopar	09/14/13 09:03 AM
Re: .040 intake p/v too tight?	dvw	09/14/13 10:17 PM
Re: .040 intake p/v too tight?	BSB67	09/15/13 02:48 AM
Re: .040 intake p/v too tight?	dodgeram1998	09/15/13 07:50 AM
Re: .040 intake p/v too tight?	B1MAXX	09/15/13 02:39 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1