Aluminum rocker arm failure - replace one or all?

Print Thread

Re: Aluminum rocker arm failure - replace one or all? [Re: polyspheric] #1496645 09/06/13 10:24 AM 09/06/13 10:24 AM
Joined: Sep 2004 Posts: 2,093 oberlin, Ohio Rapid340 top fuel
Rapid340 top fuel Joined: Sep 2004 Posts: 2,093 oberlin, Ohio	If you find no interference and you didnt over-torque by a bunch. Check to make sure you have high enough spring seat and open pressures. Yes, HIGH enough. (some margin is also a good idea)

Entire Thread
Subject	Posted By	Posted
Aluminum rocker arm failure - replace one or all?	68Bullet	09/05/13 06:41 PM
Re: Aluminum rocker arm failure - replace one or all?	dogdays	09/05/13 07:00 PM
Re: Aluminum rocker arm failure - replace one or all?	'72CudaRacer	09/05/13 08:09 PM
Re: Aluminum rocker arm failure - replace one or all?	rickraw	09/05/13 08:14 PM
Re: Aluminum rocker arm failure - replace one or all?	MR_P_BODY	09/05/13 09:07 PM
Re: Aluminum rocker arm failure - replace one or all?	68Bullet	09/05/13 10:34 PM
Re: Aluminum rocker arm failure - replace one or all?	polyspheric	09/06/13 05:17 AM
Re: Aluminum rocker arm failure - replace one or all?	Rapid340	09/06/13 02:24 PM
Re: Aluminum rocker arm failure - replace one or all?	383man	09/06/13 04:08 PM
Re: Aluminum rocker arm failure - replace one or all?	68Bullet	09/06/13 10:34 PM
Re: Aluminum rocker arm failure - replace one or all?	domingo	09/06/13 10:39 PM
Re: Aluminum rocker arm failure - replace one or all?	69dart	09/06/13 11:45 PM

Hop To