'70 Chrysler, 440 4bbl with '73 electronic ignition setup.

Last time I drove it a few weeks ago, it was running way rough and wouldn't stay running unless I had my foot in it. If I let it idle, it would stall out, but it seemed to run ok if it was revved up higher. Next day, couldn't get it to even start at all. Then it started to crank funny, like it would come to a near complete stop while the starter was turning. Then that went away the next day, then it came back. It cranks funny every other time I try to mess with it.

I can see fuel coming out and pooling on the intake, which it never did before, but it's not getting any spark. I've replaced the coil, ballast resistor, and electronic ignition module, with no result. Closest I've gotten was when I ran a wire from the positive battery post to the positive side of the coil, it finally started and ran rough for a few seconds, then died and wouldn't start again.

I'm really getting frustrated, what am I overlooking?


[image][/image] Bob SWG '68 Chrysler Town & Country, 'Katy Jo' '70 Chrysler 300 2-door '78 Impala 2-door