Okay here I go:

Carter AVS 800

Edelbrock DP4B ported dual plane intake

Ported Stealth heads with Harland Roller 1.5

Solid street roller cam @.50= 236 intake and 243 exhaust, .552 gross valve lift. Lash at .014th intake .016th exhaust

Valves 2.14" intake 1.81" exhaust

Flow rates
intake
.500 - 285
.550 - 289

exhaust
.500 - 217
.550 - 223

400 block with stroker kit to 499 cubes, compression 11:1

3.91 rear gear with 4 speed

Msd box

3900 lbs weight

mechanical edelbrock fuel pump

stock manifolds with 2 1/2 x pipe exhaust

manifold vacuum at idle 14 inches

I hope I did not miss anything. It runs and idles like a clock.

At 1000 rpm timing is 17 degrees at 1500 rpm timing is 25 degrees, never checked when it starts to advance somewhere between 1000-1500 rpm.

Last edited by Beep Beep; 08/21/13 11:23 PM.