Quote:

By the way Dayclona ,

I have corresponded with Gary and he said that there were many shims on the previous projects
That describes exactly what has happened to me and others .. I dunno what to believe .

This is Hot rodding .. not all stuff works identically if it was more women would be doing it ( sorry most women hate greasy stuff, no pun here with associated parties )

So whats the deal does Keisler or schumaker have some special deal with you does all there stuff fit sooo good..

Three cars no problems .. ? Unbeleivable ..
But hey what do I know ? Im to cheap to buy a kframe .







Andy.......I recall only one car requiring a shim on the mount, and that was an 1/8 inch, required to pin the mount, not align the airgrabber, using a factory B/RB K-Frame......any other shiming Gary may be refering to would involve the tranny mount, or pinion angle to Phase the driveline for the Keisler install, not airgrabber alignment,........I'm the guy who built the Hemi 6pak cast aluminum manifolds,....I think I would know EXACTLY how the induction system fit the cars, and the airgrabber systems

4809812-0000a.jpg (84 downloads)