Thank you, I will probably hit it with some gloss for now. We got a little side tracked moving, then buying another house and moving again as we speak. Good timing as you can see.

The good news is that I have the following replacement parts piled up for the car:

vinyl top
headliner
recovered seats
electronic ignition
DMT heater box kit
REM fire wall insulation/under-dash jute
wiper pivot seals
PG Classic dash pad (total POS, might go with a dash cap)
exhaust system
replacement exhaust manifolds on the way
replacement dash cluster/glove box door/circuit board
original AM radio
new seat belts
3-spoke wood grain wheel / center cap
steering column (duh)
carpet
sill plates
package tray/jute


I think that is all of it. I have a ton of work to do before the snow flies. I'll update my project thread in the next couple of weeks. I'm thinking once the interior is done I'll pull the glass and install the vinyl top and headliner. Once that is done it will be time to decide if the car should have satin clear over the original patina or a fresh coat of buffed silver metallic.




Thank you for asking!