Quote:

On my ATI damper , TDC is approximately 1:00 when looking at it from the front.
I took a BBC pointer and mounted it to the motor plate so I could time it , but if you come up with a decent part ( I expect no less ) , I am all in.

edited to add.......I just went out and checked.....35 degrees from 12:00 is what it looks like.



I put my digital level on the front and zeroed it out straight up, then rotated it over to TDC (actual indicator verification) and read it as 37 degrees. My design has 4 degrees of adjustment both ways so it should be covered. Sending out drawings to have parts made.