It is easy to replace. Just remove the upper and lower plastic steering column covers behind the steering wheel. The screws come in from the bottom of the lower cover. After you get that off just remove the 2 screws holding it to the column and electrical connector. Then grab the handle and pull it straight out of the bracket. FWIW, a Mopar switch will come with the bracket on the switch. Just remove the switch from the bracket and install. Otherwise the steering wheel will have to come off to replace the bracket, resulting in much more unnecessary work. One more thing, Dodge put an extended warranty on the switches for the 06 Rams. This switch will also fit your truck. It can be had for somewhere around half the price as the one they will try to sell you at the dealer for your truck. Just ask for part number CNH3X2DDAA.