Quote:
I took 2 different switches and combined them to make one for my 71 challenger. It's been 7 years now and I don't remember the part numbers. I do have some pictures somewhere that I will try to find and see if there any help.
If I can figure out how to remove the end that goes on the inside where the terminals are I could build 1 from what I have. I do have one from a 72 New Yorker with the correct 3 hole connector but the threads are too small for what I need, it just falls in the hole in the jamb.I also thought about converting to 2 wire but not sure yet how that will work out by tying 2 of the wires together prior to the switch. I hate to hack up the terminals on the wire harness to do that.
Last edited by CYACOP; 05/30/13 12:42 PM.
