Quote:

What is wrong with your current advance ?

I think I posted in another thread , a stock 750 advance is 10.5 or 11 on the arm , I have to check , I recently bought an NOS one for my 750 distributor. Also note the mechanical advance in a stock 750 is something like 31 degrees , I actually changed it on on the one I have to one that is less.

The 383- 2 bbl might actually be a better performing unit


The advance I have on the distributor right now is what came with the reman. 4 years ago but I kept my 747 dist. housing that came with the car. And I have welded up the slots to give me 22-23 degrees of mech. and with my 16-17 initial I'm at 38-39 mech. I have now decided to use this for my pertronix setup and the advance is not holding vacuum and it is only about a 7 and I need a 9 so I can get the advance at cruising speeds somwewhere around 56-57 like I had with the Mopar elect. ignition before. It does run a few degrees cooler. Thanks,