Quote:
Rollers are great in this day and age.
bet those springs are still to heavy even with the inner removed? Do the measure 1.55 across.
If they are get the inners from them and buy a nice little solid cam. may have to machine heads for the inners.
Yep, measure 1.55 across, wire thickness is 0.2", matching the inside diameter of 1.15" that is given in the catalog. Its been almost two years since I bought the valve train components and had the heads done, so I am sure the inner springs are long gone. So I am planning on replacing cam, lifters, and springs. There are no miles on the rest of the engine, so other than clean and inspect, I don't see having to do too much additional work.
Started pulling off all the accessories to get ready to pull engine. I am not looking forward to pulling the transmission.
68 Road Runner (383/4speed, post car w/decor pkg) - Major Project
69 Road Runner w/472 Hemi & 4 speed.
70 Challenger R/T SE EF8 w/ V9J, U - A32 - Major Project
2023 Ford Mach 1
| 
