Quote:

SSWWWEEETTTT!!!!!

what problems did the pvc pipe have?

I used elect. EMT pipe before same way. it had pre-bent sweeping 90* that mad things nice.

how much did it add to the the cooling system capacity?


Thanks.
The problem with PVC is you have to keep the temp below 200 deg. or it will start to sag. The old radiator I had wasn't up to the task even with a 160 stat. Secondly, there wasn't anyway to barb the ends to keep the hoses on. Double clamping worked until you got overtemp. I do recommend using PVC to mock up your routing.

I looked seriously at some EMT. The bends were too large for anything I did. My other choice was Summit exhaust tubing with some pre-bent turns.

Not sure about capacity. Maybe a gallon.