Converting my 85 318 to hyd roller, did I forget anythi

Print Thread

Converting my 85 318 to hyd roller, did I forget anythi #1420355 04/15/13 05:16 PM 04/15/13 05:16 PM
Joined: Oct 2010 Posts: 162 Iowa T tt76400 OP member
tt76400 OP member T Joined: Oct 2010 Posts: 162 Iowa	I have a 1985 318 roller block, cam and lifters from a 1998 318 magnum, pushrods from a 1990 Dodge 318 roller cam 318 with TBI, Hughes cam snout extension to use a mechanical fuel pump, 360 heads, and a standard link-type timing set, is this all I need to convert to a hydraulic roller cam in my 318?

Entire Thread
Subject	Posted By	Posted
Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/15/13 09:16 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	340SHORTY	04/16/13 12:15 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/16/13 12:42 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/16/13 01:30 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/16/13 01:34 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/17/13 03:55 AM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/17/13 01:23 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/17/13 10:24 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	scratchnfotraction	04/18/13 01:40 PM
Re: Converting my 85 318 to hyd roller, did I forget anythi	tt76400	04/18/13 10:11 PM

Hop To