Quote:

---

Quote:

---

Just to clear up a point that the others have missed concerning the spring pockets, the half ton and light duty 3/4 ton (those being the 3300 lb front axle rating) trucks do NOT have a spring pocket. The springs sit on the top of the control arm, not down in a pocket. The heavy duty 3/4 ton (4400 lb axle rating) and the vans as previously mentioned all have a pocket that the springs sit in as shown in the pic above of the custom built control arm. Using one of these pocketed arms on a truck that does not have a pocketed arm will lower the truck, using the stock spring for the truck. If your truck has the pockets, then you will need to either cut your springs, use 1/2 ton springs, or modify the dakota spindles to fit the larger bolts used on your truck.

Clear as mud, right?

---

I figured that was made clear that halfton and light 3/4 didn't have the lca's with the deeper pockets when van arms and 1tons were all that was mentioned

---

And yet he continued to ask about the pocket. There was obviously some confusion and the only reference to explaining it was your first reply, but you still didn't specifically say that the half tons didn't have a pocket.

Just trying to help.