Engine to Transmission brace on 340/360

Print Thread

Engine to Transmission brace on 340/360 #1406005 03/21/13 08:57 AM 03/21/13 08:57 AM
Joined: Oct 2003 Posts: 2,403 WASHINGTON, PA 1 11secaarcuda OP top fuel
11secaarcuda OP top fuel 1 Joined: Oct 2003 Posts: 2,403 WASHINGTON, PA	Is the engine to transmission brace that goes from the bellhousing to the drivers side of the engine different for 340 engines and 360 engines? I have a 78 360 block I am putting in my Cuda that originally had a 340 and now this brace seems to short. 67 Dart GT 340 4 speed 70 AAR Cuda 408 6 barrel 96 Indy Ram original owner 2011 Hemi Durango

Entire Thread
Subject	Posted By	Posted
Engine to Transmission brace on 340/360	11secaarcuda	03/21/13 12:57 PM
Re: Engine to Transmission brace on 340/360	MoparforLife	03/21/13 02:39 PM
Re: Engine to Transmission brace on 340/360	70Cuda383	03/21/13 02:43 PM
Re: Engine to Transmission brace on 340/360	62maxwgn	03/21/13 03:35 PM
Re: Engine to Transmission brace on 340/360	John_Kunkel	03/21/13 06:06 PM
Re: Engine to Transmission brace on 340/360	HotRodDave	03/21/13 07:49 PM
Re: Engine to Transmission brace on 340/360	11secaarcuda	03/21/13 09:32 PM
Re: Engine to Transmission brace on 340/360	Siba	05/13/15 01:04 PM
Re: Engine to Transmission brace on 340/360	Challenger 1	03/21/13 03:10 PM
Re: Engine to Transmission brace on 340/360	BDW	03/21/13 03:27 PM
Re: Engine to Transmission brace on 340/360	burdar	03/21/13 03:30 PM
Re: Engine to Transmission brace on 340/360	BDW	05/10/15 06:57 PM
Re: Engine to Transmission brace on 340/360	GO_Fish	03/22/13 02:13 AM
Re: Engine to Transmission brace on 340/360	RapidRobert	05/11/15 05:16 PM
Re: Engine to Transmission brace on 340/360	roe	05/13/15 03:46 AM
Re: Engine to Transmission brace on 340/360	cudaman1969	05/13/15 01:35 PM
Re: Engine to Transmission brace on 340/360	aarcuda	05/13/15 01:57 PM
Re: Engine to Transmission brace on 340/360	BDW	05/13/15 03:04 PM

Hop To