Cam selection for 410 ci SB - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cam selection for 410 ci SB

Print Thread

Re: Cam selection for 410 ci SB [Re: topside] #1396538 03/04/13 07:39 PM 03/04/13 07:39 PM
Joined: Oct 2008 Posts: 492 South Jersey, NJ D DragDart360 mopar
DragDart360 mopar D Joined: Oct 2008 Posts: 492 South Jersey, NJ	The cam Crower recommended should get you into the 10.20-.30 range I run a Bullet roller 264/268 .636 lift and have gone 9.95 in good air at 2815 lbs. Best of luck 70 Dart Swinger, 2850 lbs SB 408, Bullet roller 264/268 @50 .636 SSDS stage 2 Edelbrock heads, 1 7/8 Headmans, 1050 dominator by Dom, 9.867 @ 133

Entire Thread
Subject	Posted By	Posted
Cam selection for 410 ci SB	mopartuner	03/03/13 02:13 PM
Re: Cam selection for 410 ci SB	krw71ragtop	03/03/13 03:29 PM
Re: Cam selection for 410 ci SB	radar	03/03/13 03:42 PM
Re: Cam selection for 410 ci SB	mopartuner	03/04/13 09:58 PM
Re: Cam selection for 410 ci SB	topside	03/04/13 10:24 PM
Re: Cam selection for 410 ci SB	mopartuner	03/04/13 10:45 PM
Re: Cam selection for 410 ci SB	Guitar Jones	03/04/13 10:50 PM
Re: Cam selection for 410 ci SB	DragDart360	03/04/13 11:39 PM
Re: Cam selection for 410 ci SB	justinp61	03/03/13 03:41 PM
Re: Cam selection for 410 ci SB	mopartuner	03/04/13 10:51 PM
Re: Cam selection for 410 ci SB	topside	03/04/13 11:12 PM
Re: Cam selection for 410 ci SB	cudadoug	03/04/13 11:27 PM
Re: Cam selection for 410 ci SB	Triple Threat	03/04/13 11:19 PM
Re: Cam selection for 410 ci SB	rt66jim	03/04/13 11:19 PM
Re: Cam selection for 410 ci SB	Dunnuck Racing	03/05/13 01:48 AM
Re: Cam selection for 410 ci SB	72swgnr	03/05/13 02:27 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1