The window has 4 inserts where it screws to the regulator piece that slides up and down the track on each side.

I had to work throgth the holes in the door panel to unfasten the window and remove it first as the whole assembly would never fit.

My question now seems is how do I install the fuzzies? I am assuming I can only do the outer one as it screws into the door itself (on top of the door molgins) and I don't see how I could reach the screws once the glass is installed...

The inners must fasten to the inside door panel itself as there are no holes/clips to fasten the inner fuzzies to the door. I guess these can go one when I do the inside panels.


I was just hoping there was somebody here who had done this before and could point me in the right direction so I don't waste a ton of time and more importantly, mar up my new AMD glass. :-(