I have a Pro Comp 440 billet distributor like this one:

http://www.competitionracingsupply.com/i...27_procomp.html

It has 3 wires coming out. A red one, a black one and an orange one.

I am gonna wire it using an MSD 6AL ignition.

How should I wire the distributor??? Should I wire it like the schematics that MSD suggests for a Mallory UNilite or 9000 series? Red wire on the dist goes to ignition key, white wire out of the MSD to the orange wire on the distributor, and black wire coming out of the distributor to ground???