Hi!

Im doing final assembly on my 67 HEMI cuda race car and I notice that my headers are super close to lots of things:

1.-External 12 AN 90° oil fitting out of the oil pump (I only have about 1/8" clearance between the fitting and one of the primaries). Do you think Its a problem and I should put some header wrap on the offending primary?

2.-Its also close to some brake lines, and close to the metering block....Not rubbing but close...and the exhaust gases will exit beside the brake line....Will the heat affect the brake fluid?

3.- Its also close to the trans oil cooler braided aeroquip lines, but I guess I can shield those...

4.-And last, the header collectors ARE TOUCHING the trans blanket. Do you think the nylon lining of the blanket can catch fire if it's in direct contact with the header collectors?

Thanks in advance for the input.

Domingo